Tesla Wiper Blade Replace Buy

Tesla "Wiper Blades Guide" How to replace, Cost, Size

1. Introduction

In this guide, you will learn when and how to replace, size, cost etc.

2. When to replace?

  • For optimum/better performance, wiper blade should be replace every year.
  • It need to check on regular basis the condition of rubber for cracks, splits, and roughness. If rubber is damaged, you should replace the blade immediately to avoid damage the Windshield Glass and to improve visibility. 
  • In case if the wipers remain ineffective after cleaning.

3. Wiper Blade Size

Model Driver's side Passenger's side
S 26 inches (650 mm) 20 inches (500 mm)
X 26 inches (650 mm)  21 inches (530 mm)
3 26 inches (650 mm)  19 inches (475 mm)
Y 26 inches (650 mm) 20 inches (500 mm)

4. How to clean and check

Wiper blades should be clean on regular basis and check the rubber condition to prevent damage on the windshield glass.

4.1 Product to clean Wiper Blades

  • Wiper blades should clean windshield and wiper blades with washer fluid.
  • You should use non-abrasive glass cleaner which is approved for car glass and rubber.

4.2 Process to Clean

You need to lift the wiper arm a short distance away from windshield. It should be enough to access the wiper blade. Please do not lift wiper arms beyond its intended positions.

4.3 Which tools and parts need to replace Wiper Blade

  • new Wiper Blades
  • Microfiber towel to prevent damage/scratch/crack on the windshield.

4. Appointment to Replace Tesla Wiper Blades

 If you need an appointment for Wiper Service. Please book on online. In case if you would like to replace your self and has any question or need online support. Please contact us.

  • Replace wiper blade
  • Check wiper condition
  • Buy new wiper blade

5. How to Replace Wiper Blades

  • shift car into park and turn off the wipers.
  • move the the wipers in service position. Controls > Service > Wiper Service Mode>ON
How to enable Tesla Wiper Service Mode
  • lift the wiper arm a short distance away from windshield. It should be just far enough to access the wiper blade.

Tesla lift the wiper arm

  • Place a towel in between the wiper arm and windshield to prevent damage/scratch/crack on the windshield.

Tesla Wiper Blade Place Towel

  • hold the wiper arm and press the locking tab while sliding the wiper blade down the arm.

Tesla Wiper Blade Replace

Tesla Wiper Blade Place locking tab

  • align the new wiper blade on the wiper arm and slide it towards the end of the wiper arm until it will lock into place.

Tesla Wiper Blade align the wiper blade

  • turn Wiper Service Mode off to return the wipers to their normal position/place. Controls > Service > Wiper Service Mode>

 Note/Caution:

  • Use only wiper blade which are identical to the original blade.
  • Incorrect blades can damage the wiper system and windshield glass. 

6. Buy Wiper Blade

If you would like to buy wiper blade. Please have a look in collection or contact us.

 

FAQ

 

Source Tesla, DIY

 

 

 

Torna al blog

Disclaimer: Tesla, Inc. was not involved in the creation of this document. Tesla did not provide us any info. Tesla did not edit, review or authorize us. We gather this information from Tesla official website and other resources.

Note: It is your responsibility to double check and confirm that the procedures/info mentioned in this blog are applicable to your specific car before performing them. Please contact us or our workshop partner to make sure/confirm. We will be happy to help you.