1. Introduction
There could be many reasons for this alert.
1.1 Why its important to have isolation in electric car?
High Voltage systems are mounted on car chassis. There must be a minimum electrical isolation/resistance in between High Voltage System and Car Chassis to ensure safe car operation.
There is monitor which is installed in battery, which measure periodically the resistance between the high voltage conductors and chassis.
1.3.1 Internal Isolation
Internal isolation is related to High Voltage Battery and possible code could be BMS_a123
- BMS_a123_SW_Internal_Isolation
1.4 What will happen?
2. How to Diagnose
This alert could come because of isolation issue. It need to check additional alerts to find out the exact cause of this alert. The exact cause of this alert could be diagnosed with the help additional alerts.
2.1 How to check additional alert
It could be possible to find out exact cause via Remote Diagnosis, Service Mode. In case, you need support for diagnosis. Please contact us.
2.2 Remote Diagnosis
Please read more details about Remote Diagnosis in another guide (How to do, Cost etc.) Link If you need support. Please Contact Us Phone/Whats App +49(0)15226242038
2.3 Service Mode
It could be possible to find out the exact cause of the alert with the help of services alerts in Service Mode.
How to do isolation diagnosis in Service Mode
It could be possible to do self diagnose via Service Mode.
How to read service alerts in Service Mode
- On the touchscreen, click Controls > Software
- Touch and hold the large word "MODEL" for 4 seconds and then release.
- Enter "service" as access code.
- After clicking on Service Alerts. You can read service alerts. If there is anything wrong with car. It will show in active alerts.
Service > Battery > High Voltage
If everything is good. You will see green circles.
In case, if there is any High Voltage issue. You will see low resistance value and red circle.
Service Mode > High Voltage
In case, If you need support for diagnosis. Please Connect Us.
If you need support. Please send us Service Alert Screenshot via Contact or Whats App +49 (0) 15226242038. We will be happy to help you to explain alert and how could be fixed, cost, support for fixing if possible online support or to organize an appointment with independent affordable workshop.
Depend on alert/fault code, High Voltage Battery might need to be repaired/replaced.
3. How to Fix it
Some of alert could come because of software bugs. Some of alert could resolve after restarting the system, software update/reinstall. To fix some of alerts, car might need hardware repair.
3.1 Restart System
Some of alert could resolve after restarting the touchscreen or power of the car.
Restart Touchscreen
Firstly, you could try with soft reset (restart touchscreen)
How to restart soft reset (restart touchscreen)
- Please shift car into park.
- Hold down both scroll buttons on the steering wheel until the touchscreen turns black.
- Please wait approximately 30 seconds for the touchscreen to restart.
Please read more details in another guide (how to do). Link
Powering Off the Car
If soft reset (restart touchscreen) have not resolved the alert/issue. You could try hard reset (Powering Off the car).
- Please shift car into park
- On the touchscreen please touch Controls > Safety > Power Off
- Please wait for at least for two minutes without interacting with the car. Please do not open the doors, touch the brake pedal, touch the touchscreen etc.
- After 2 minutes, please press the brake pedal or open the door to wake the car (Source Tesla)
3.2 Software issue
Some of alert could be related to software issue.
Software Bug and Glitches
One of reason could be problem with software bug and glitches. Did you get this alert after updating recent software version? If yes, it could be related with software bug and could resolve with future software update. Please send us Service Alert screenshot. So we will inform you if it could be related to software bug. Link
Firmware not updated
One of main reasons could be that firmware is not updated. Have you checked recent update and updated to recent version? If not, we recommend you to do that. Please read more details in another guide. Link
Hardware Issue
There could be some hardware issue/faulty. Some of common hardware issues could be followings:
Recent Repair/Service
Did this alert pop up after recent repair/service? If yes, please let us know which repair/service was done recently. Some alerts could pop up if repair/service is not done in proper way. If system/alert has not be reset. Did you use aftermarket/used part?
3.2 Physical defect of the insulation material
There could be physical damage.
3.3 Contamination
Contamination (of any size, e.g. dust, bolts, etc.), or moisture. Please have a detail look in another guide about Water Ingress/Moisture. Link
4.4 High Voltage Battery Repair/Replacement
You might need to repair/replace high voltage battery. Please read more details about it in another guide. Link
3. Find and book best Workshop to fix Isolation issue
If you are looking for Workshop who is expert to fix such issue with best price. Please contact us with details in which country/city, are you looking for. Contact to Fix Isolation Issue
4. Alert Code
Some of most common possible alert code
BMS_a123_SW_Internal_Isolation
BMS_f123_SW_Internal_Isolation
BMS_w123_SW_Internal_Isolation
Please send us "Service Alert" Screenshot via Contact or Whats App +49 (0) 15226242038. We will be happy to help to fix alert.
4. Online Support/Help
In case if you need any support or have any question. We will be happy to provide you Online/Remote Support. Please Contact Us.
5. Cost
Cost could vary depend on issue, type of workshop, location. If you are looking for online support or affordable independent workshop. Please free to contact us or have a look in Price List
Donation/Support
If you feel you have benefited from this guide. Please consider donation, which will help us to create more such free guide for you. It will also show us that this guide was helpful for you.
For Repair Workshop Owner
If you car repair workshop owner and would like to add your workshop in our list. Please contact us.
Comment
Please leave us comment if you have any questions, if you would like to add/edit/delete some content in guide, if you would like to have guide on any another topic etc.
Share this guide Link
Please feel to share this guide/website link.
FAQ
1. Can i reset the alert?
It is recommend not do reset alert as long issue is not repaired.
2. Is it common issue?
Yes, it could happen on old battery packs if isolation will degraded due to water ingress.
3. Will cleaning will be the solution?
It might not help.
4. What need to do?
Need to find out the cause of water leak and need to repair battery.
